Here's the step by step procedures with screenshots on how to flash and upgrade the Samsung Galaxy Tab P1000 to 2.3.3 Gingerbread firmware:
Download the following needed files in this process.
2.3.3 Gingerbread Firmware
With bootloaders: (USE THIS ONE)
Without bootloaders:
Odin 1.7 Downloader
PIT File: gt-p1000_mr_PIT.zip
DBDATA
Flashing the 2.3.3 Gingerbread Firmware on Samsung Galaxy Tab P1000 Steps and Procedures Using ODIN:
1. Extract all the downloaded files in one folder.
2. Double click ODIN.exe to run the program.
3. Check these:Re-Partition
4. In the PDA section place the extracted main firmware .tar file.
5. Place the extracted .pit file in the PIT section .
4. In the PDA section place the extracted main firmware .tar file.
5. Place the extracted .pit file in the PIT section .
6. Turn the Samsung Galaxy Tab P1000 into Download Mode: Hold the Power and Volume down button at the same time and it will have a android robot in a triangle w/ a shovel digging,. Then connect the device to PC, the ID:COM box is and indication that the device is connected properly to PC.
6. Click the Start button and it will flash the firmware.
Wait until the whole process successfully completes...
7. Place the Samsung Galaxy Tab P1000 into Download Mode again. Hold the Power and Volume down button at the same time, then connect it to PC.
7. Place the Samsung Galaxy Tab P1000 into Download Mode again. Hold the Power and Volume down button at the same time, then connect it to PC.
3. Hit START button to flash the dbdata.tar file.
Samsung Galaxy Tab P1000 USB Driver For Windows 7
Samsung Galaxy Tab P1000 USB Driver For Windows 8
Samsung Galaxy Tab P1000USB Driver For Windows XP
Samsung Galaxy Tab P1000 USB Driver For Windows Vista
Download Driver
0 comments:
Post a Comment